Conductivity cell probes

Conductivity cell probes
For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.

Standard conductivity cell probe TetraCon® 325:
4-pole cell with integral temperature sensor. Measuring range: 1µS/cm to 2S/cm.

Special conductivity cell probe TetraCon® 325/C:
As TetraCon® 325, 4-pole cell with integral temperature sensor, but with sensor head made of chemically resistant PEEK. Measuring range: 1µS/cm to 2S/cm
TypeTetraCon® 325
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m1.5
PK1
Cat. No.06377884
ab Zentrallager (ca. 5 Arbeitstage)
TypeTetraCon® 325/C
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m1.5
PK1
Cat. No.09852404
-
TypeTetraCon® 325-3
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m3.0
PK1
Cat. No.09073531
Lieferzeit ca. 15 Arbeitstage
TypeTetraCon® 325-6
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m6.0
PK1
Cat. No.09073530
-
TypeTetraCon® 325-10
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m10.0
PK1
Cat. No.09073529
-
TypeTetraCon® 325-15
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m15.0
PK1
Cat. No.09073528
-
TypeTetraCon® 325-20
Length mm120
ElectrodeGraphite
ShaftEpoxy resin
Cell constantK =0.475
Cable length m20.0
PK1
Cat. No.09073527
-