D.O. sensors with continuous measuring accuracy. Selction of models with an automatic self diagnosis system, a shorter response time and different cable lengths. All models are supplied with accessories box and can be connected to the monitor Oxi 298 (exception: TriOxmatic® 700).
TriOxmatic® 700: For biological cleaning steps (wastewater treatment plants).
With automatic self diagnosis SensReg (electrolyte consumption) and SensLeck (membrane monitoring). Medium response time of t90 < 180 s. Only available as retrofit fitting for analog converters of the Ecoline® and QuadroLine® series. Digital version still available (IQ Sensor Net System 181).
TriOxmatic® 690: For measuring tasks in wastewater/water. Economic model without self diagnosis.
TriOxmatic® 701: With increased resolution for the measurement of residual oxygen in the denitrification. Based on the increased resolution, a shorter response time (t90 < 30 s) and the thinner special membrane, this sensor can be used for quicker response processes with lower O2 concentrations.
Scope of supply: Sensor incl. accessories box with membrane heads, electrolyte solution, cleaning solution, cathode cleaner | Specifications | TriOxmatic® 600/700 // TriOxmatic® 701 | | Temperature range: | -5 ... 50 °C | | DO concentration: | 0.0 ... 60.0 mg/l // 0.00 ... 20.00 mg/l | | DO saturation: | 0 ... 600 % // 0.0 ... 60.0 mg/l / 0.0 ... 200.0 % / 0 ... 600 % | | Pressure resistance: | 10 bar |
|